防静电国内外标准目录
防静电国家标准及资料
一、国家标准(GB,GB/T,GBJ)
• GBJ 79-1985    工业企业通信接地设计规范
• GB 6951-1986     轻质油品装油安全油面电位值
• GB/T 6833.3-1987 电子测量仪器电磁兼容性试验规范静电放电敏感度试验
• GB/T 11210-1989  硫化橡胶抗静电和导电制品电阻的测定
• GB 12014-1989   防静电工作服
• GB/T 1410-1989  固体电工绝缘材料体积电阻率及表面电阻率试验方法
• GB 12158-1990   防止静电事故通用导则
• GB/T 12582-1990  液态烃类电导率测定方法 ( 精密静电计法 )
• GB/T 12703-1991  纺织品静电测试方法
• GB 13348-1992   液体石油产品静电安全规程
• GB/T 14288-1993  可燃气体与易燃液体蒸气最小静电点火能测定方法
• GB/T 50174-1993  计算机机房设计规范
• GB 4385-1995   防静电鞋、导电鞋技术要求
• GB/T 15463-1995  静电安全名词术语
• GB/T 6539-1997  航空燃料与馏分燃料电导率测定法
• GB/T 2439-2001  硫化橡胶或热塑性橡胶导电性能和耗散性能电阻率的测定
• GB/T 2887-2000  电子计算机场地通用规范
• GB 6950-2001    轻质油品安全静止电导率
• GB 4655-2003   橡胶工业静电安全规程
二、国家军用标准(GJB)
• GJB/Z 25-1991  电子设备和设施的接地、搭接和屏蔽设计指南
• GJB 1649-1993  电子产品防静电放电控制大纲
• GJB 2527-1995  弹药防静电要求
• GJB 2605-1996  柔性热密封防静电阻隔材料规范
• GJB 3007-1997  防静电工作区技术要求
• GJB/Z 86-1997  静电放电防护包装手册
• GJB/Z 105-1998  电子产品防静电放电控制手册
三、电子行业标准(SJ,SJ/T)
• SJ/T 10147-1991 集成电路防静电包装管
• SJ 20154-1992  信息技术设备静电放电敏感度试验
• SJ/T 10533-1994 电子设备制造防静电技术要求
• SJ/T 10630-1995 电子元器件制造防静电技术要求
• SJ/T 10694-1996 电子产品制造防静电系统测试方法
• SJ/T 11159-1998  地板覆盖层和装配地板静电性能的试验方法

国外静电相关标准 ESD standards
 
• ESD S1.1:1998—Evaluation, acceptance, and functional testing of wrist straps. 

• ESD STM2.1:1997—Resistance test method for electrostatic discharge protective garments. 

• ESD STM3.1:2000—Ionization. 

• ESD SP3.3:2000—Periodic verification of air ionizers. 

• ESD S4.1:1997—Worksurfaces—Resistance measurements. 

• ESD STM4.2:1998—Worksurfaces—Charge dissipation characteristics. 
  
• ANSI/ESD STM5.1:2001—Electrostatic discharge sensitivity testing—Human body model. 

• ANSI/ESD STM5.2:1999—Electrostatic discharge sensitivity testing—Machine model. 

• ANSI/ESD STM5.3.1:1999—Charged device model (CDM)—Component level. 

• ESD S6.1:1999—Grounding—Recommended practice. 

• ANSI ESD S7.1:1994—Floor materials—Resistive characterization of materials. 

• ANSI ESD S8.1:1993—ESD awareness symbols. 

• ESD S9.1:1995—Resistive characterization of footwear. 

• ESD SP10.1:2000—Automated handling equipment. 

• ANSI ESD S11.11:1993—Surface resistance measurement of static dissipative
planar materials. 

• ESD STM11.12:2000—Volume resistance measurement of static dissipative planar materials. 

• ANSI ESD S11.31:1994—Evaluating the performance of electrostatic discharge shielding bags. 

• ESD STM12.1:1997—Seating-resistive characterization. 

•ESD STM13.1:2000—Electrical soldering/desoldering hand tools. 

•ANSI ESD S20.20:1999—Standard for the development of an ESD control program. 

•ESD STM97.1:1999—Floor materials and footwear—Resistance in combination with a person. 

•ESD STM97.2:1999—Floor materials and footwear voltage measurement in combination with a person. 

•AFLCR 65-8:1998—Maintenance—Engineering and supply: Electrostatic discharge (ESD) control program. 

•ANSI C63.14:1998—American national standard dictionary for technologies of electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD)—Dictionary of EMC/EMP/ESD terms and definitions. 

•ANSI C63.16:1993—American national standard guide for electrostatic discharge test methodologies and criteria for electronic equipment. 

•ANSI N322:1997—American national standard inspection, test, construction, and performance requirements for direct reading electrostatic/electroscope–type dosimeters. 

•ANSI T1.308:1996—Central office equipment—Electrostatic discharge immunity requirements. 

•ASQ P672:1996—Auditing ESD and cleanroom processes. 

•ASTM D257-78—Standard test methods for dc resistance or conductance of insulating materials. 

•ASTM D991-83—Standard test method for rubber properties—Volume resistivity of electrically conductive and antistatic products. 

•ASTM D5077-90:1997—Standard terminology relating to electrostatic discharge (ESD) packaging materials. 

•ASTM E1549-95:2000—Standard specification for ESD-controlled garments required in cleanrooms and controlled environments for spacecraft for nonhazardous and hazardous operations. 

•ASTM F150-98—Standard test method for electrical resistance of conductive and static dissipative resilient flooring. 

•ASTM F1812-97a—Standard test method for determining the effectiveness of membrane switch ESD shielding. 

•Bellcore GR-1421-CORE:1995—Generic requirements for ESD-protective circuit packet containers.

•BS 6654:1985—Method for determination of the electrical resistivity of textile floor coverings. 

•BS EN 100015-2:1994—Basic specification—Protection of electrostatic-sensitive devices—Requirements for low-humidity conditions. 

•BS EN 100015-3:1994—Basic specification—Protection of electrostatic-sensitive devices—Requirements for cleanroom areas. 

•BS EN 100015-4:1994—Basic specification—Protection of electrostatic-sensitive devices—Requirements for high-voltage environments. 

•BS EN 1149-1:1996—Protective clothing—Electrostatic properties—Surface resistivity (test methods and requirements). 

•BS EN 1149-2:1997—Protective clothing—Electrostatic properties—Test method for measurement of the electrical resistance through a material (vertical resistance). 

•BS EN 1718:1999—Light conveyor belts—Test method for the measurement of the electrostatic field generated by a running light conveyor belt. 

•DI-ATTS-80285B:1997—Engineering support data (ESD). 

•DI-RELI-80669:1992—Electrostatic discharge (ESD) control program flag. 

•DI-RELI-80671:1992—Handling procedures for electrostatic discharge (ESD) sensitive items. 

•EIA 471:1980—Symbol and label for electrostatic sensitive devices. 

•EIA 541:1988—Packaging material standards for ESD-sensitive items. 

•EIA 541:1990—Packaging of electronic products for shipment. 

•EIA 545:1989—Electromechanical switch test method for electrostatic discharge (ESD). 

•EIA 625—Handling electrostatic discharge sensitive (ESDS) devices. 

•EIA-JEP 108—Distributor requirements for handling electrostatic discharge sensitive (ESDS) devices. 

•EOS/ESD EP102:1988—Electrostatic discharge and electronic equipment: A practical guide for designing to prevent ESD problems. 

•EOS/ESD EP103:1990—ESD program management: A realistic approach to continuous, measurable improvement in static control. 

•EOS/ESD EP105:1995—ESD in silicon integrated circuits. 

•ESD 1:2000—General practices for ESD control for MR and GMR heads. 

•IEC 60801-2:1991—Electromagnetic compatibility for industrial-process measurement and control equipment—Electrostatic discharge requirements. 

•IEC 61000-4-2:1995—Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 2: Electrostatic discharge immunity test. 

•IEC 61000-4-2:1999—Electromagnetic compatibility (EMC)—Part 4-2: Testing and measurement techniques—Electrostatic discharge immunity test. 

•IEC 61087:1991—Guide for evaluating the discharges from a charged surface. 

•IEC 61340-1:1998—Electrostatics—Part 1: Guide to the principles of electrostatic phenomena (IEC/101/35/CD). 

•IEC 61340-2-2TR3:2000—Electrostatics—Part 2-2: Measurement methods—Measurement of chargeability. 

•IEC 61340-2-3:2000—Electrostatics—Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation. 

•IEC 61340-3-1:1998—Electrostatics—Part 3-1: Methods for simulation of electrostatic effects—Human body model (HBM)—Component testing (IEC/101/33/CD). 

•IEC 61340-3-2:1998—Electrostatics—Part 3-2: Methods for simulation of electrostatic effects—Machine model (MM)—Component testing (IEC/101/34/CD).

•IEC 61340-4-1:1995—Electrostatics—Part 4: Standard test methods for specific applications—Section 1: Electrostatic behavior of floor coverings and installed floors. 

•IEC 61340-4-3:1999—Test method for the characterization of electrostatic protective footwear (IEC document 101/62/CD). 

•IEC 61340-5-1TR2:1998—Electrostatics—Part 5-1: Protection of electronic devices from electrostatic phenomena—General requirements. 

•IEC 61340-5-2TR2:1999—Electrostatics—Part 5-2: Protection of electronic devices from electrostatic phenomena—User guide. 

•IEC/PAS 62162:2000—Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components. 

•IEC/PAS 62179:2000—Electrostatic discharge (ESD) sensitivity testing human body model (HBM).

•IEC/PAS 62180:2000—Electrostatic discharge (ESD) sensitivity testing machine model (MM). 

•IEEE C62.38:1994 (R1999)—IEEE guide on electrostatic discharge (ESD)—ESD withstand capability evaluation methods (for electronic equipment subassemblies). 

•IEEE C62.47:1992—IEEE guide on electrostatic discharge (ESD)—Characterization of the ESD environment. 

•ISO/DIS 10605:2000—Road vehicles—Test methods for electrical disturbances from electrostatic discharge. 

•ISO/TR 10605:1994—Road vehicles—Electrical disturbances from electrostatic discharge. 

•JESD 22-A114-B:2000—Electrostatic discharge (ESD) sensitivity testing human body model (HBM). 

•JESD 22-A115-A:1997—Electrostatic discharge (ESD) sensitivity testing machine model (MM). 

•JESD 22-C101-A:2000—Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components.

•MIL-PRF-87893B:1997—Workstation—Electrostatic discharge (ESD) control. 

•QPL-87893-1:1995—Workstation electrostatic discharge (ESD) control. 

•RAC SOAR 6:1986—ESD control in the manufacturing environment. 

•SAE J551/15:1995—Vehicle electromagnetic immunity—Electrostatic discharge (ESD).


 

服务咨询热线 : 0769-8191 2018 ×